Booyah Instant Salt Remover & Protectant- Concentrate
BOOYAH CLEAN INSTANT SALT REMOVER & PROTECTANT
Clean and protect your boat, engine, gear, and trailer after every saltwater outing. This product is tough on salt but gentle on surfaces and the environment.
Booyah Clean Instant Salt Remover & Protectant is a concentrated formula designed to dissolve and remove embedded salt and salt residue before it can cause corrosion, surface damage, or rust. Safe for use on painted and finished surfaces, it also adds a protective barrier to help prevent future salt damage.
This product is EPA SAFER CHOICE CERTIFIED for direct release, making it safe to use in marinas, slips, or on dry land where collecting or treating wash water is not practical.
Safe for use on: fiberglass, steel, aluminum, glass, magnesium, isinglass, wood, chrome, plastics, rubber, waxed finishes, and ceramic coatings.
Use Booyah Clean Instant Salt Remover to:
- Flush outboard, inboard, outdrive, and cooling systems
- Rinse away salt from hulls, trailers, and topsides
- Soak and protect tools, gear, and equipment
- Help prevent long-term corrosion and surface damage
DIRECTIONS
General Use: Mix with clean water at a 1:60 ratio (2.1 oz per gallon) up to 1:100 (1.28 oz per gallon). Wet the surface thoroughly and allow the product to sit for at least 30 seconds. Rinse with clean water. Wipe or blow dry if desired.
To Flush Outboard/Inboard/Outdrive/Cooling Systems and Heat Exchangers:
Attach a mixer to a garden hose. Remove the reservoir cup, fill it with Instant Salt Remover, and reinstall. Connect the other end to your flushing port and run for 2 to 5 minutes. For best results, do not flush with water after applying.
To Remove Salt and Protect Surfaces:
Attach the mixer to a hose and apply to the surface. Rinse thoroughly with fresh water.
To Soak Gear and Equipment:
Mix 1 oz of concentrate per 1 gallon of water in a bucket or pail. Soak the item, scrub if needed, then rinse with fresh water
- Free UPS Ground on orders over $200
- $7 flat rate on orders under $200
- Same-day shipping on orders placed before 2pm ET, Mon–Fri (business days)
- Most items ship UPS Ground or USPS Priority Mail. Hazardous materials (flammable, corrosive or oxidizer products) ship UPS Ground only and are not eligible for USPS, expedited, overnight or air shipping.
- Discounted UPS overnight rates available on non-hazardous items
The training at Marine Detail supply is very hands on and educational. the knowledge that you will gain from industry professionals is going to help take your business to the next level.
Add customer reviews and testimonials to showcase your store’s happy customers.
FAQ
Will there be hands on demonstration?
Absolutely. We will have a boat in the shop to work on. We typically focus on the hull sides. All the Starke products, pads and machines will be on display and available for use.
Will there be classroom work?
Yes. We like to sit down and go over some over the basics. We will have a presentation and slideshow. We start by introducing everyone. We like to ask why each person came and what they wanted to gain from this experience. Once we figure that out we can then dial in the message to focus on where everyone needs the most information.
Is this an accreditation course?
Yes. Sign up for this course to become a Starke Certified Installer and be listed on our site and receive special discounts on Starke products.
If I am a DIYer, can I attend this course.
Absolutely. This class is for the professional or the enthusiast. The techniques we will be teaching work across the board.